Silent Generators
Acoustic canopies that keep the noise down where it matters: hospitals, CBD sites, residential streets and live events. The same power, a fraction of the sound.
Read More Generator Hire
Industrial Generators
Containerised sets built for continuous heavy load. Units over 100kVA can be synchronised to run in series, giving you redundancy, load bearing and the ability to take a machine offline without dropping the site.
Built to carry the whole plant
Industrial power is a different problem to site power. The load runs continuously, the starting currents are large, and an unplanned stop costs far more than the hire.
Synchronised in parallel Redundancy, load bearing and hot swaps above 100kVA.
ComAp control systems IG500 and IG1000, installed to your specification.
Redundancy you can take a machine out of
Above 100kVA the sets run in series, so the string keeps carrying the plant even with one unit offline.
That means load bearing, a spare machine already in the string, and the ability to pull one out for service without dropping production. Containerised sets, sized on the real load profile, with controls that hand over before anyone notices.
We have done it on hire and on permanent installations: four 550kVA sets synchronised with ComAp IG500 controls and field tanks at Barwon Water, two 770kVA sets with a new generator switchboard and ATS control at Brown Brothers, and two 1,500kVA super-silent sets with a 60,000L fuel system for the AusNet micro grid at Corryong.
- 100kVA – 1500kVA Containerised and canopied sets built for continuous heavy load.
- Bulk fuel systems Field tanks and industrial fuel cells up to 60,000L, monitored on long runs.
- Load-bank tested Proof of capacity under real, measured load before the plant relies on it.
4 × 550 kVA synchronised, Barwon Water
From your call to power on
No triage queue and no handballing. The person who picks up is the person organising your set.
-
You call, we answer
A real person on the phone any hour of any day, not an after-hours message bank. Tell us the site and what has gone down.
-
We size it on the call
Our electricians and generator specialists work out what will carry the load now, and what the connection needs to look like.
-
Dispatch and connect
The set goes out on our own float fleet, and our A-grade electricians make the connection and commission it on site.
-
We stay accountable
Fuel management, monitoring and on-call technicians until your operation is back on, stable, and no longer needs us.
Trusted Across Victoria
Power for the projects that can’t go dark.
Backup Generator Selecting the Right Industrial Generator Capacity
Industrial sizing is not the domestic sum scaled up. Load type, load factor, harmonics and redundancy all change the answer.
3 min read 
Backup Generator Emergency Power for Hospitals and Healthcare Sites
The hardest brief in temporary power: a load that cannot drop, a building full of people, and no convenient time to test.
3 min read 
Diesel Generator Diesel Generator Longevity: Why Maintenance Decides It
Diesel engines are built to run for decades. What shortens them is almost never the engine, and almost always neglect of four systems around it.
3 min read Frequently asked
What does it mean to run generators in parallel?
Two or more sets are synchronised so they share the load as one supply. Above 100kVA our units can be run in series, which gives you redundancy if a machine drops out, the ability to carry a load bigger than any single set, and a way to take one offline for service without shutting the site down.
Can a hired industrial generator run continuously?
Yes. The industrial fleet is built for continuous duty, and we back it with monitored refuelling, remote monitoring and on-call technicians, so a long run does not depend on somebody remembering to check it.
Do you supply the controls and switchgear as well?
Yes. We design and install ComAp IG500 and IG1000 control systems, generator switchboards, change-over gear and automatic transfer, and commission the lot. That work has gone into Barwon Water, Brown Brothers Winery, the AusNet micro grid at Corryong and a Defence installation in the Northern Territory.
How is the fuel handled on a long industrial hire?
With field tanks or industrial fuel cells sized to the run, up to 60,000L, and scheduled refuelling from our own trucks. On monitored contracts we track consumption and top up before it becomes your problem.
How quickly can you get bulk power to a plant?
We hold hire stock in Kilsyth and run our own delivery fleet, including crane trucks for placement, so metropolitan deliveries are usually same day or next day. For an outage we are on call 24 hours per day, 7 days per week, and average a metro response under 90 minutes.
Can you service generators we already own?
Yes, and we do it at scale. We hold maintenance and breakdown contracts covering large fleets of client-installed generators, including one covering more than 100 units for Yarra Valley Water and Ventia. Brand is not a barrier, we are vendor-agnostic.
Get the right advice
Contact our team today
- Replies within one business hour
- 24 hours per day, 7 days per week
- Hire, sales, servicing & installation
