Load assessment & design
Detailed load assessment, site inspection and growth forecasting, so the set is sized for the facility you will have, not just the one you have now.
Installation
Generator Installation
From single-unit setups to complex, site-integrated systems for critical operations. Designed, installed, commissioned and documented by our own licensed electricians, mechanics and fitters.
Infrastructure, not a connection
Installation is not just about getting power connected. It is about delivering a robust, intelligent power infrastructure that is built to last.
Our installations are supported by advanced generator control and automatic transfer systems that seamlessly manage power changeover between mains and your backup supply. That is what gives you uninterrupted continuity during an outage, and a smooth transition once grid power is restored.
Every install covers site preparation, concrete pad and acoustic enclosure works, fuel system design, cable runs and all electrical connections through to mains power, so the system is ready to perform from day one.
- Licensed, in-house crew Electricians, mechanics and fitters on staff, so no part of the job is handed off.
- Permanent or temporary The same standard whether it is a standby install or a hire arrangement.
- Documented handover Tested, commissioned and fully documented, ready for an auditor.
What an installation covers
Six workstreams, one accountable team. Nothing on this list gets handed off and forgotten.
Site preparation
Concrete pad works, plinths and acoustic enclosure works, so the set has somewhere compliant and quiet to live.
Fuel system design
Day tanks through to bulk field tanks and industrial fuel cells, designed for the runtime the site actually needs.
Cable runs & connection
All electrical connections through to mains power, run and terminated by our own A-grade electricians.
Controls & automatic transfer
Generator control and automatic transfer systems that manage change-over between mains and backup, and back again when grid power returns.
Testing & documentation
Tested, commissioned and fully documented, so the system is auditable from the day it is handed over.
Assess, design, install, commission
-
Assess
Load assessment, site inspection and growth forecasting to determine the optimal generator for the operation.
-
Design
The full system on paper: set, pad, acoustics, fuel, cable routes, controls and change-over strategy.
-
Install
Site preparation, mechanical placement, fuel system, cable runs and electrical connection through to mains.
-
Commission
Tested under load, commissioned, documented and handed over, with a service program ready to start.
Installs in progress
Real Eastern Generators installations: placement, fuel systems, controls and commissioning.
Systems we have commissioned
Synchronised arrays, ComAp control systems and bulk fuel, delivered onto utility, defence and industrial sites.
Barwon Water
4 × 550kVAWerribee West, Victoria
Supplied and installed synchronised generators, designed and installed ComAp IG500 controls and 2 × 10,000L field tanks.
AusNet Services
2 × 1,500kVACorryong, Victoria
Supplied and installed super-silent generators with ComAp IG1000 controllers to network specification, plus a 60,000L fuel system for a micro grid.
Australian Defence Force | Ventia
3 × 500kVADelamere, Northern Territory
Supplied and installed generators with ComAp IG500 control systems, integrated into an existing hybrid installation.
Brown Brothers Winery
2 × 770kVANorth-East Victoria
Supplied and installed synchronised generators, plus a new generator switchboard with ATS control.
Frequently asked
What does a generator installation actually include?
Site preparation, concrete pad and acoustic enclosure works, fuel system design, cable runs and all electrical connections through to mains power, plus the control and automatic transfer systems, testing, commissioning and documentation. It runs from single-unit setups through to complex, site-integrated systems for critical operations.
What is an automatic transfer switch and do I need one?
An automatic transfer switch senses the loss of mains supply and changes the site over to the generator without anyone having to be there, then transitions back once grid power is restored. If the site cannot afford to wait for someone to arrive and start a set manually, you need one.
How do you decide what size to install?
A detailed load assessment and site inspection, plus growth forecasting. We look at essential load demands and potential site expansion, because a generator sized only for today becomes the constraint the moment the facility grows.
Can you install a generator I have already bought?
Yes. We are vendor-agnostic, so we will install and commission a unit you already own or have purchased elsewhere, and pick up the servicing afterwards if you want it on a program.
Do you install temporary as well as permanent systems?
Both. The same in-house team installs permanent standby systems and the temporary installations that carry a site through a switchboard upgrade or an outage, including fuel, exhaust and electrical connection.
Backup Generator Backup Generator Installation: DIY or Professional?
In Australia the honest answer is narrower than the question suggests. Here is what you can legally do yourself, and what a proper install actually involves.
3 min read 
Backup Generator Power With Precision: Maintaining Backup Generators
A standby generator spends most of its life doing nothing. The service program is what turns that idle machine back into a guarantee.
3 min read 
Generator for Hire Business Continuity and Emergency Generator Hire
Most continuity plans handle power in a single line that says 'arrange a generator'. Here is what that line should actually contain.
3 min read Installation enquiries
Start with a site visit
Tell us what the facility has to carry and where it is heading. We will assess the load, design the system and quote the full scope.
